HONEYWELL LMB PRESS RELEASE
Honeywell high reliability LMB fans and blowers for Aerospace and military applications are distributed exclusively in North America by Allied International. For more info contact sales@alliedinter.com

Briggs Cunningham Biography recalls Allied founder Alec Ulmann Sr.

ALLIED JOINS NDIA
We are pleased to announce that we have been accepted for membership in NDIA The National Defense Industrial Association. membership in this body will enhance the visibility of our Honeywell LMB high reliability Mil/Aero fans and blowers which are have been selected by US defense contractors such as Northrop Grumman, Goodrich, BAe Systems, ACME, Boeing, and FLIR.

AEROMART
We will be participating in the Aeromart November 29 and 30 in Toulouse.

Eurofard Catalogs Now On Line
In preparation for their attendance at Electronica in Munich, Eurofard has up graded their web site to allow download of all their catalogs of capacitors and filters.

AVIATION INDUSTRY EXPO

We will be exhibiting at the Aviation Industry Expo Tuesday March 20 through Thursday March 22, 2007 at the Orlando County Convention Center, Orlando FL. We hope to see you at our booth 973 on the center aisle dividing the AS3 from the GSE. We will be displaying Tronair GSE, Honeywell LMB high reliabity fans and blowers, Eurofarad high reliability capcitors and of course our own acoustic media and fabrications such as the cabin air silencer for the Lear 45.

Eurofarad
ACTUAL SUCCESS STORY
EUROFARAD has been selected for specific Hold-Up Capacitor Design at EADS Defense Electronics.
This 220uf 600V Capacitor (size 125X90X32.5mm) is under test in the Power Supply Unit that feeds subsytems of the A400M Military Transport Aircraft.
This optimized design was selected based on price, weight/cost and reliability evaluation.
The capacitor incorporates Eurofarad's industry leading plastic film dielectric noted for:
* Small package size
* Self healing properties
* Low ESR and low inductance
* Light weight
* No variation of capacitance versus applied voltage and versus temperature
* High RMS current & Voltage gradient

Eurofarad
ACTUAL SUCCESS STORY
EUROFARAD has been selected for specific Hold-Up Capacitor Design at EADS Defense Electronics.
This 220uf 600V Capacitor (size 125X90X32.5mm) is under test in the Power Supply Unit that feeds subsytems of the A400M Military Transport Aircraft.
This optimized design was selected based on price, weight/cost and reliability evaluation.
The capacitor incorporates Eurofarad's industry leading plastic film dielectric noted for:
* Small package size
* Self healing properties
* Low ESR and low inductance
* Light weight
* No variation of capacitance versus applied voltage and versus temperature
* High RMS current & Voltage gradient

SIC-SAFCO NEWS
The Radial solder range of Aluminum Electrolytic capacitors, manufactured in France by SIC-SAFCO and distributed in the North America by Allied International, ALSIC145 -55 +145°C, 10 - 100V, is enlarged with rated voltage 50V and ripple currents increased.

RoHS

European directive 2002/95/EC

Restriction of the use of certain hazardous substances
in electrical and electronic equipment

Every product with restriction use (mercury, cadmium, hexavalent chromium, polybrominated flame retardants) is not present in SIC-SAFCO capacitors, except lead contained in solder coating of some capacitor ranges, manufactured before January 1st 2006 :

- Screw terminals capacitors (FELSIC ranges) are completely in accordance with the directive.

- New radial non cylindrical range CUBISIC is completely in accordance with the directive.

- Axial capacitors (PRORELSIC, PROMISIC, RELSIC, SICAL) are in accordance with the directive since January 2000. At this date solder coating was changed into pure tin coating.

- Radial capacitors with snap-in pins (SNAPSIC range) are in accordance with the directive since September 1st2005 (Ø 25, 35 and 40) or since January 1st 2006 (Ø 22, 30, 45). Pins are coated with pure tin coating.

- Radial capacitors with straight pins (CI-FRS range) or with wires (ALSIC ranges) are in accordance with the directive since September 1st 2005. Terminals are coated with pure tin coating.

We advise to follow pure tin soldering recommendations : temperature bath 260 – 265°C, 2 s, >= 2 mm from capacitor body without flux, according to IEC 60 068-2-54 (test Ta method 1).

Article codes are unchanged. But capacitors where lead is prescribed, have now special code number.

NBC BLOWER
Honeywell LMB pioneered a very specific design with one main blower and a scavenge blower, both driven by a single motor.
The main blower is used to blow air within the crew compartment whereas the scavenge one cleans the NBC (cyclone) filter. In order to avoid "dirty" air coming from the scavenge fan to the main blower, there is a magnetic coupling between the motor and the scavenge fan which is totally "sealed".

French and German Transport ministers Dominique Perben and Wolfgang Tiefensee visiting the Titeflex stand at ILA Berlin on May 16, 2006 attended by Allied's Klaus Bruder

New Eurofarad Plastic Film Cap
EUROFARAD is extremely proud to include a new component in its family of capacitors for high frequency switch mode power supplies, the PM06. With values up to 220MF / 50V for example, this component is definitely at the top of the technology of film capacitors.



The PM06 features the remarkable characteristics of the range of EUROFARAD film capacitors for switch mode power supplies.



In operation:

- self healing: possibility to withstand some accidental peak of voltages;

- low ESR and inductance;

- wide range of operating frequencies;

- high RMS current and voltage gradient;

- high stability of the value of the capacitance versus temperature change (range of temperature is -65/+125°C);

- value of the capacitance does not change versus applied voltage;



From the design point of view:

- component is not polarized;

- light weight;

- small size;

- resistance to harsh environment.



The PM06 is definitely a component of choice for all new designs of SMPS.

Allied International is at your service for any more information you may need regarding this new component – or other components of EUROFARAD range!

Thursday April 13,2006. The office is closed Good Friday April 14 and will reopen on Monday April 17.

Allied International Shut Down - High Winds Knock Out Power in Northeast The Acoustic Diviion in DeLand Florida is open.

SHUTTLE
Here's a picture Steve Skelley, Engineering Manager took from in front of the Acoustic Division factory. A little under one minute into the launch, you can see the flame and smoke trail in the middle of the picture. The space center is about 45 miles from there.

Allied International welcomes Jack Naunas to the military/aerospace electronics sales team. Jack is covering the states of Indiana, Ohio, Kentucky and Michigan. Jack can be reached at Naunas Sales Company [naunassales@earthlink.net]

HONEYWELL LMB now has its own web site up. http://www.lmbsa.com If you have a military or commercial application requiring a high reliability brushless dc fan we would like to help you. As the North American distributor for LMB our emphasis is on service, flexibility and fair pricing. Contact sales@alliedinter.com or call 914 241 6900.

COGITOBIO

COGITOBIO computer engineers are developing 3D models used for the “Digital Human”.


Cogitobio is a French company that is bringing about a revolution in transportation passenger comfort. For the first time, the living human body is being digitally modeled to enable designers to evaluate seating designs for comfort bringing mathematical rigor to a previously entirely empirical and subjective analysis. Under contract from the SNCF, Cogitobio designed the interior of the the latest generation TGV in conjunction with the recommend fashion designer Christian Lacroix. Cogitobio has selected Allied International because of our experience in both the rail and the aerospace markets and because of our focus on noise attenuation which is also a important comfort consideration.

JAMES STALEY MANUFACTURING Carmel, NY, manufacturer of test benches for overhaul of aircraft fuel, pneumatic and hydraulic components has appointed Allied International as European Sales Represntatives. This activity will complement Allied's marketing of Tronair Aviation Ground Support Equipment as an international distributor.

Electro Preci
Another cutting edge A380 electronic component manufacturer has chosen Allied to distribute their products in the USA. Based in Cannes Ecluse France, Electro Preci specializes in custom inductors, filters, coils, windings, resitors, and chokes for the aerospace/defense industry. IS9001 approved, Electro Preci is responsible for the electrical as well as the mechanical design to meet their customer requirements. A recent design featured 0.1 mm thick aluminum tape wound core with copper leads. The technology offers the designer the benfit of considerable weight saving. For information contact alec@alliedinter.com